Publicité
CONTENT (#1):
1 - Plastic adjustment buckle.
2 - Plastic webbing termination.
3 - ARB'O comfortable seat.
NOMENCLATURE (#2):
1 - Comfortable seat.
2 - Adjustment and attachment webbing.
3 - Webbing end.
4 - Plastic adjustment buckle.
5 - Aluminum adjustment buckle.
DESCRIPTION :
Comfortable seat allowing working in seated position on tree climbing works.
To use with our tree climbing belt ARB'O.
This equipment is not a PPE.
Do not protect against fall from a height.
SETTING UP THE SEAT (#4) :
1 - Pass the strap through the plastic adjustment buckle (Rep.4).
2 - Slide along the strap, the adjustment buckle up to about half of this strap.
3 - Connect the seat to the ARB'O tree climbing belt passing by the offset hooking plate.
Pass through the aluminum adjustment buckle (Rep.5) of the seat.
4 - Pre-adjust the strap length by passing into the aluminum adjustment buckle (Rep.5).
5 and 6 - Lock the strap by passing into the plastic adjustment buckle (Rep.4).
7 and 8 - Pass the end of the strap (Rep.2) through the strap termination (Rep.3). Do not
cross from the plastic loop.
9 - Close the strap termination part (Rep.3) by pressing firmly on each side until you
hear a click.
Repeat the operation on the other strap.
Once in place, adjust the strap length using the adjustment loops until it is suitable for
the user's morphology.
Before using the ARB'O for the first time or after any adjustment has been made to
it, suspension tests and retention tests on each hooking and rescue points must be
carried out in a safe place to validate the comfort and expected effectiveness.
Publicité
