Whirlpool W11426601B Manuel D'utilisation page 23

To Convert Oven Broil Burner (Propane to Natural
gas)
1. Remove broil burner screw and set aside.
2. Remove the broil burner from the broil burner orifice hood.
The broil burner will hang in the back of the oven while
changing the orifice hood.
A. Broil burner screw
B. Broil burner orifice hood
3. Turn the green Number 0.037 Propane gas broil burner orifice
hood counterclockwise to remove.
A. Number 0.037 Propane gas broil burner orifice hood
4. Install the Number 0.054 Natural gas broil burner orifice hood,
turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number 0.054 Natural gas broil burner orifice hood
5. Place the broil burner on the broil burner orifice hood. Insert
the broil burner locator pin in the hole in the oven back.
6. Position the broil burner against the roof of the oven cavity
and attach with screw.
A. Broil burner orifice hood
B. Broil burner
To Convert Surface Burners (Propane to Natural
gas)
1. If the burner grates are installed, remove them.
2. Remove the burner caps.
3. Using a Phillips or Torx
A. Burner cap
B. Gas tube opening
®
screwdriver, remove the burner base.
C. Burner base screws
D. Burner base
23