Setting The Saw Chain - Echo CS-370 Manuel D'instructions

All manuals and user guides at all-guides.com

SETTING THE SAW CHAIN

Drive link
Tie strap
Right hand cutter
Sharpen lower edge
Keep this angle
Push file as shown
90°
Hold the file horizontally
Preset tie strap
Important points for proper maintenance of saw
chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly
- Note that blunt or irregular cutters will result in
• Drive link serves to remove sawdust from the
SETTING SAW CHAIN
• For setting saw chain, round file (4.0 mm dia.
• To keep correct position and correct angle,
30°
29
Left hand cutter
Top plate
Guard link
aligned.
poor cutting performance, increased vibration of
chains and premature breakage of the saw chain.
groove of the guide bar.
Keep the lower edge of the drive link sharp where
indicated.
5/32 in.) and flat file are used.
use the file holder (Sure Sharp
Side plate
Depth guage
).
®
CS-370