Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Become familiar with these terms
before operating the unit.
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per
minute; a unit of measure of air deliv-
ery.
PSIG: Pounds per square inch
gauge; a unit of measure of pressure.
Code Certification: Products that
bear one or more of the following
marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified
independent safety laboratories and
meet the applicable Underwriters
Laboratories Standards for Safety.
Cut-In Pressure: While the motor is
off, air tank pressure drops as you
continue to use your accessory.
This unit is capable of powering the following Accessories. The accessories are
available through the current Power and Hand Tool Catalog or full-line Sears
stores.
Accessories
•
In Line Filter
•
Tire Air Chuck
•
Quick Connector
Sets (various sizes)
•
Air Pressure
Regulators
•
Oil Fog Lubricators
•
Air Hose:1/4", 3/8" or
1/2" I.D. in various
lengths
Specialty Tools
•
Inflating/Blow Gun
•
Grease Gun
•
Caulk Gun
•
Engine Cleaner
•
Sand Blaster
Carpentry Tools
•
Finishing Nailer /
Stapler
•
Construction Nailer /
Stapler
GLOSSARY
When the tank pressure drops to a
certain low level the motor will restart
automatically. The low pressure at
which the motor automatically
restarts is called "cut-in" pressure.
Cut-Out Pressure: When an air
compressor is turned on and begins
to run, air pressure in the air tank
begins to build. It builds to a certain
high pressure before the motor auto-
matically shuts off - protecting your
air tank from pressure higher than its
capacity. The high pressure at which
the motor shuts off is called "cut-out"
pressure.
Branch Circuit: Circuit carrying elec-
tricity from electrical panel to outlet.
ACCESSORIES
Socket Driving
•
1" Impact Wrench
•
3/4" Impact Wrench
•
1/2" Impact Wrench
•
3/8" Impact/Butterfly
Wrench
•
1/2" Ratchet
•
3/8" Ratchet
•
1/4" Ratchet
Material Shaping
•
2.625" Hammer
•
1.625" Hammer
•
1/2" Drill
•
3/8" Drill
•
High Speed Rotary
•
Mini High Speed
Rotary
•
Cut-Off Tool
•
Shear
•
4" Angle Grinder
•
Reciprocating Saw
•
Nibbler
9- ENG
Spray Painting
•
Multi-Purpose Spray
Gun
•
Automotive Spray
Gun
•
HVLP Spray Gun
Finishing/Sanding
•
High Speed Sander
•
Random Orbit
Sander
•
6" DA Sander
•
Jitterbug Sander
•
Straight Line Sander
D24544
Publicité
Table des Matières
