Bodum 11754 BISTRO Mode D'emploi page 7

5 Shower head
6 Filter holder
7 Coffee filter
Ensure that no ground coffee remains in the filter (7) before
putting it in the dishwasher.
Note: Clean the coffee filter (7) thoroughly after every use.
MAINTENANCE De-Scaling The Programmable Coffee Maker
AND CARE
To guarantee that the Programmable Coffee Maker works
correctly, you have to ensure that the machine is kept free of
lime-scale. The optimum cycle is dependent on the hardness
of the water which is different from country to country. We
would advise de-scaling the machine after every 30 uses.
IMPORTANT: If you do not de-scale the Programmable
Coffee Maker then this can lead to damage!
Regular de-scaling can increase the service life of the prod-
uct and guarantees its faultless functionality. Furthermore,
regular de-scaling will result in less steam forming, faster
brewing times and energy savings.
Deposits should be removed with a commercially available
de-scaling solution for coffee machines or with a solution
of vinegar and water (20% vinegar and 80% water). When
using commercially available de-scaling solutions ensure
that these are suitable for use with heating elements made
of copper as well as silicone materials. (Carefully check the
specifications and dosage instructions of the manufacturer).
Fill the water tank (2) with descaling solution or a vinegar
and water solution (do not fill above the MAX line) and place
the shower head (5), filter holder (6), coffee filter (7) (without
ground coffee) and the glass jug (9) into their intended posi-
tions in the appliance.
Brew the vinegar or descaling solution till the tank is empty.
ATTENTION! During the cleaning process more steam will
occur than during the normal brewing. After dripping has
stopped, pour the liquid completely out of the carafe. Let the
coffee maker cool down for 10 minutes.
Then rinse the separate parts thoroughly with cold water
8 BODUM® measuring spoon
11 Jug lid
9 Glass jug
11
and rinse the appliance by running through with cold, clear
water at least twice. Prior to doing so ensure that all of
the separate parts have been correctly reassembled in the
Programmable Coffee Maker.
Any other servicing should be performed by an authorized
service facility.
CLEANING THE The shower head (6) can be cleaned and de-scaled sepa-
SHOWER HEAD
rately. In order to do so open the lid (3), the shower will come
automatically upwards too. Release the shower head (5)
from the shower body (4) by turning the rib the left side. Then
you can pull away the set shower head. Clean the shower
head (5) with a descaling solution. Subsequently rinse it
thoroughly with clear water before putting the shower head
carefully back.
CAUTION: When cleaning the shower head do not use hard
brushes or pointed or sharp objects because these may
scratch or damage the surface.
IMPORTANT: The warranty is voided if no de-scaling is
carried out or this is not carried out in accordance with the
operating instructions.
STORAGE Always disconnect the Programmable Coffee Maker from the
socket when it is not in use.
12
EN