Maintenance; Grease Filter; Carbon Filter; Cleaning - Electrolux EFS 633.1 Manuel D'utilisation

Maintenance

Before performing any maintenance
operation, disconnect the hood from
the electricity.

Grease filter

This serves to hold the grease particles in suspen-
sion. The metal filter should be washed every
month with warm soapy water or, if possible, in
the dishwasher (60°C).
Remove the filter:
● Move tabs E inwards (Fig. 2).
● Pull the grid slightly outwards and turn it
downwards.
● To remove the grid, slide it out from the right-
hand side until the grid is unhooked (Fig. 3).
● To remove filter M, open the grid, open tabs L
and pull out the filter (Fig. 13).
● Leave to dry before refitting it. Be sure that the
grease filter, once blocked with tabs L (Fig. 13)
cover completely the holes of the grid.
Whenever the grease filter is cleaned, the relative
grid should also be cleaned with non-abrasive
detergents.

Carbon filter

This filter dissolves cooking odours.
It should be changed every 6-8 months in normal
use.
The carbon filter must never be washed.
To remove the filter, turn it anti-clockwise until it
becomes unhooked and free.
Attention
Failure to observe the rules for cleaning the appli-
ance and changing and cleaning the filters may
cause fires. Therefore, we recommend observing
these instructions.

Cleaning

To clean the outside of the hood use a cloth mois-
tened with denatured alcohol or neutral liquid
detergents. Never use products containing
abrasives.
Fig. 13

Changing the lamps

● Disconnect the hood from the electricity.
● Open the suction grid
● Replace the damaged part with one of equal
rating. (Max 40 W E 14.).
32
L
M