251~255
CH7
0~255
3. Manual program setting:
A1 Mode
A2 Mode
A3 Mode
S1 Mode
S2 Mode
S3 Mode
d Mode
L Mode
5. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit's optics.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
7. IR Remote controller introduction
DMX: Press DMX button which returns to original DMX values.
AUTO: Press AUTO mode, and then press + / - setting different AUTO mode program.
SOUND: Press SOUND mode, and then press + / - setting different SOUND mode program.
SPEED: Press SPEED mode, and then press + / - setting different SPEED mode.
BLACK OUT: setting On / Off (return to the present program)
FLASH: Press FLASH mode, and then press + / - setting different FLASH SPEED mode.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2013
Sound program 3 by DMX
Auto DMX/ Sound DMX Speed (Slow--Fast)
Auto program 1
Auto program 2
Auto program 3
Sound program 1
Sound program 2
Sound program 3
DMX setting.
"0" for Light Off under Sound mode no music, "1" for Light On under Sound mode
no music.
4MOON-BAR
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
5