Allen + Roth 35207 Instructions Pour L'assemblage page 6

ASSEMBLY INSTRUCTIONS
2. Loosen the set screws found on coupling on top of the motor assembly (F). Then remove the hair
and clevis pin that will be used on a later step.
2
3. Insert down rod (B) through canopy (C), and motor
coupling cover (E). Feed wires from the motor
assembly (F) through the down rod (B), then insert
the down rod (B) into the coupling found on top of
the motor assembly (F).
Hair Pin
F
6
Safety Cable
Coupling
Clevis Pin
3
C
E
Lowes.com/allenandroth
B
F