Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Features
Overload Protection
Edge Cleaning
The telescopic wand length is adjustable and requires no assembly. To adjust, simply
press the wand button and slide the wand to the desired setting.
Release button and continue to slide wand until it locks into position.
The OVERLOAD PROTECTION RESET button stops the nozzle motor when the brush
jams to prevent belt breakage.
NOTE: The vacuum cleaner motor will continue to run.
To Correct Problem:
• Unplug electrical cord.
• Check nozzle areas for excessive lint buildup or jamming.
• Clean jammed area.
To Reset:
• Press reset button on top of the nozzle. Plug in and turn on vacuum cleaner.
Edge cleaning feature enables improved cleaning of carpets near walls and furniture.
Automatic Adjusting Nozzle
The nozzle of your vacuum cleaner automatically adjusts to any carpet pile height.
Feature allows nozzle to float evenly over carpet pile surfaces. No manual adjustments
required.
9 9
Publicité
Table des Matières
