Carpet/Bare Floor Selector; Using Tools - Dustbane Quiet Serie Manuel De Pièces Et D'opérations

Carpet/Bare Floor Selector

Using Tools

8 8
Selector should be placed in BARE FLOOR (TOOLS) position when using vacuum cleaner
on bare floors and when using tools. The agitator does not rotate in the BARE FLOOR
(TOOLS) position. Selector should be placed in CARPET position when using vacuum
cleaner on carpeted floors.
WARNING: Incorrect setting may cause floor or carpet damage.
CAUTION: Selector should be placed in BARE FLOOR (TOOLS) position when
using vacuum cleaner on bare floors and when using tools. Incorrect setting
my cause floor or carpet damage.
The agitator does not rotate in the upright position.
CAUTION: When using attachments, place one hand on the vacuum cleaner
to prevent tipping the vacuum cleaner over. DO NOT overextend your reach
with hose as it could tip vacuum cleaner.
Remove wand from short hose by twisting and pulling up. The tools can be attached to
hose, wand or crevice tool. Place all tools and hose back in the same manner as shown
in TOOL STORAGE.
The Crevice Tool may be used on the following items:
• Furniture
• Cushions
• Drapes
• Stairs
• Walls
The Dusting Brush may be used onthe following items:
• Furniture
• Drapes
• Stairs
• Walls