Cleaning Secondary Filter - Dustbane Quiet Serie Manuel De Pièces Et D'opérations

• Spread out new dust bag, taking care not to tear bag.
• Attach new dust bag onto bag holder by holding cardboard portion and pushing
back.
• Reinsert tab on end of dust cover into groove on dust compartment.
• Press dust cover into place without pinching dust bag.
• DO NOT operate without dust bag installed.

Cleaning Secondary Filter

• Secondary filter protects the motor.
• It is recommended to clean filter with cold water at least every three (3) months.
Check the secondary filter frequently and clean when dirty.
• Check filter when installing a new dust bag.
• Turn off and unplug the vacuum cleaner.
• If dirty, pull filter from bottom of dust compartment and clean.
• Wash with cold water only, DO NOT use detergent or soap.
• Once the filter is washed clean, squeeze by hand and allow to air-dry.
• Allow filter to dry for 24 hours before placing back into vacuum cleaner.
11 11