Automatic Heat Up; Powerboost - AEG I64KV443FB Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
6.6 Bridge
The function operates when the
pot covers the centres of the two
zones. For more information on
the correct placement of
cookware refer to "Using the
cooking zones".
This function connects two left side cooking
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch
change the heat setting touch one of the
control sensors.
To deactivate the function: touch
cooking zones operate independently.

6.7 Automatic Heat Up

Use the function to get a desired heat setting
in a shorter time. When the function is on, the
cooking zone operates at the highest heat
setting in the beginning and then continues to
operate at the desired heat setting.
To activate the function the
cooking zone must be cold.
32
ENGLISH
To activate the function for a cooking
zone: touch
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.

6.8 PowerBoost

This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
6.9 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
. To set or
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
. The
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
(
comes on). Immediately
Refer to "Technical data"
chapter.
.
comes on.
or
of the
to set
to set the
.
to set
. The

Publicité

Table des Matières
loading

Table des Matières