Dell PowerConnect 28 Serie Guide De Mise En Route page 230

To add a management station:
Please enter the SNMP community string to be used:
Please enter the IP address of the Management System (A.B.C.D) or wildcard(0.0.0.0) to
manage from any Management Station:[0.0.0.0]
2
Now we need to setup your initial privilege Level 15 user account.
15
This account is used to login to the CLI, Telnet and Web interface.
CLI Telnet
You may setup other accounts and change privilege levels later.
For more information on setting up user accounts and changing privilege
levels, see the user documentation.
To setup a user account:
Enter the user name<1-20>:[admin]
Please enter the user password:*****
Please reenter the user password:*****
*****
3
Next an IP address is setup.
The IP address is defined on the default VLAN,(VLAN #2). This is the IP
address you use to access the Telnet, Web interface, or SNMP interface for
the switch.To setup an IP address:
IP
Telnet Web
IP
Please enter the IP address of the device (A.B.C.D):10.6.22.100
Please enter the IP subnet mask (A.B.C.D or nn):[255.255.255.224]
228
[Dell_Network_Manager]
[0.0.0.0]
IP
VLAN VLAN #2
SNMP
A.B.C.D :10.6.22.100
A.B.C.D nn :[255.255.255.224]
SNMP
IP A.B.C.D
0.0.0.0
<1-20>:[admin]
IP
IP
*****
IP