Table des Matières
Publicité
2 Attach the supplied standard AC power cable to the AC connector on the back panel of the device.
Figure 3-1. Connecting to PowerConnect 2800 Series Console Port
Figure 3-2. Attaching AC Power cable to device
3 Locate an AC power receptacle.
4 Deactivate the AC power receptacle.
5 Connect the device to the AC receptacle.
6 Activate the AC power receptacle.
7 After activating the AC power receptacle, confirm that the device is connected and operating correctly
by examining the LEDs on the front panel.
Starting and Configuring the Device
15
Publicité
Table des Matières
