Table des Matières
Publicité
Figure 2-2. Bracket Installation for Wall Mounting
3 Insert the supplied screws into the wall-mounting bracket holes and tighten with a screwdriver.
4 Repeat the process for the wall-mounting bracket on the other side of the device.
5 Place the device on the wall in the location where the device is being installed.
6 On the wall mark the locations where the screws to hold the device must be prepared.
7 On the marked locations, drill the holes and place all plugs (not provided) in the holes.
8 Secure the device to the wall with screws (not provided). Ensure that the ventilation holes are not
obstructed.
10
Mounting the Device
Publicité
Table des Matières
