Fust NOVAMATIC FH66-412K Notice D'utilisation page 13

Masquer les pouces Voir aussi pour FH66-412K:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

15
c
Finally, fold the clips back down towards the
oven (d). So that the door closes properly,
press down on the clips with something (e.g.
a screwdriver) (e). Slowly check the properly
working of the door.
d
e
Important! Never leave the door hinge
levers standing up. Otherwise the spring
action can lead to injury.
All manuals and user guides at all-guides.com
Models in stainless steel or aluminium
We recommend to clean the oven door using
only a wet sponge and dry it up after cleaning
with a soft cloth.
Never use steel wool, acids or abrasive prod-
ucts as they can damage the oven surface.
Clean the oven control panel following the
same precautions.
The correct operation of the oven is ensured
by a gasket placed round the edge of the
oven cavity.
Periodically check the condition of this gas-
ket. If necessary, clean it without using abra-
sive cleaning products.
If the gasket shows to be damaged, call you
local Service Centre. Do not use the oven
until it has been repaired.
Oven shelves
Warning! Before proceeding ensure the
oven is cool and disconnected from the
electricity supply.
To clean the oven shelves, soak in warm
soapy water and remove stubborn marks
with a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth.
Oven bulb replacement
Warning! To avoid possibility of an
electric shock, ensure that the appliance
is switched off and disconnected from
the electricity supply before replacing
the bulb.
To replace the faulty bulb:
1. turn the glass cover anticlockwise and re-
move.
2. remove the faulty bulb and replace with a
new one.
3. refit the glass cover.
4. reconnect the appliance to the electricity
supply.
13

Publicité

Table des Matières
loading

Produits Connexes pour Fust NOVAMATIC FH66-412K

Table des Matières