Transporting The Work Platform; Preparation For Shipment; Lifting By Forklift; Lifting By Crane - Upright SL26SL Guide De L'opérateur

060588-026 SL26/30SL
T
RANSPORTING THE
P
R E P A R A T I O N F O R
1. Fully lower the platform.
2. Disconnect the battery negative (-) lead from the battery terminal.
3. Band the controller to the front guardrail.
4. Band the elevating linkage to the frame.
L
I F T I N G B Y
NOTE: Forklifting is for transporting only.
C A U T I O N
!
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
platform.
L
I F T I N G
1. Secure straps to chassis tie down/lifting lugs only.
2. Place the platform onto the transport vehicle in trans-
port position.
3. Chock the wheels.
4. Secure the work platform to the transport vehicle with
chains or straps of adequate load capacity attached to
the chassis tie down/lifting lugs.
D
R I V I N G O R
T
R U C K O R
NOTE: Do not winch faster than 0,3 m/s (1 ft./sec.).
1. Move the machine onto the truck or trailer;
A. To Drive the machine onto the transport vehicle:
a. Move the work platform up the ramp and into transport position.
b. Set the wheels straight and turn off the machine.
c. Chock the wheels.
B. To Winch the machine onto the transport vehicle:
a. Move the work platform up to the ramp.
b. Attach the winch cable to the tie down/lifting lugs.
c. Release the parking brakes (refer to "Towing or Winching" on page 10).
d. Winch the platform into transport position
e. Chock the wheels.
2. Secure the work platform to the transport vehicle with chains or straps of adequate load capacity
attached to the chassis tie down/lifting lugs.
C A U T I O N
!
Tie down lugs are not to be used to lift work platform.
Overtightening of chains or straps through tie down/lifting lugs may result in damage to the work
platform.
Page 12
All manuals and user guides at all-guides.com
W P
ORK
S
H I P M E N T
F
O R K L I F T
!
B C
Y R A N E
W
I N C H I N G O N T O A
T
R A I L E R
!
LATFORM
Front Tie
Downs/
Lifting Lugs

Transporting the Work Platform

Figure 6: Transporting Work Platform
Forklift
Rear Tie
Downs
Operator Manual
Rear
Lifting Lug
(typical)