Towing Or Winching; Parking Brake Release (Figure 4); After Use Each Day - Upright SL26SL Guide De L'opérateur

060588-026 SL26/30SL
T W
OWING OR
Perform the following only when the machine will not operate under its own power and it is necessary to
move the machine or when winching onto a transport vehicle (see "Transporting the Work Platform" on
page 12).
P
A R K I N G
Perform the following only when the machine will not operate under its own power and it is necessary to
move the machine or when towing the machine up a grade or wenching onto a trailer to transport.
1. Close the needle valve by turning the knob clockwise.
2. Pump the Brake Release Pump until the Parking Brakes release and the wheels can be turned.
3. The machine will now roll when pushed or pulled.
4. Be sure to open the needle valve and verify that the Parking Brakes have engaged before the machine
is operated.
W A R N I N G
!
Never operate the work platform with the parking brakes inoperative. Serious injury or damage could
result.
Never release the brakes if the machine is on a slope.
Chock the wheels before releasing the parking brakes.
Hook the machine to a towing vehicle before releasing the parking brakes.
Never tow faster than 0,3 m/sec (1ft./sec.)
A U E
FTER SE
1. Ensure that the platform is fully lowered.
2. Park the machine on level ground, preferably under cover, secure against vandals, children or unautho-
rized operation.
Turn the key switch to OFF and remove the key to prevent unauthorized operation.
Page 10
All manuals and user guides at all-guides.com
INCHING
B R
R A K E E L E A S E
D
ACH AY
(F
I G U R E
!

Towing or Winching

4)
Figure 4: Brake Release Pump
Needle Valve
Operator Manual
Brake
Release