Operation; Switch On Device; Operating The Three-Way Cock; Overview: Controls Control Panel - Nouvag MD 20 Mode D'emploi

NOUVAG AG

6.1 Switch on device

The control device can be switched on or off with the main switch "I/O" (at the back!).

6.2 Operating the three-way cock

With the three-way cock four different positions can be
selected for cooling:
Position : motor 1 connected to cooling
Position : both motors connected to cooling
→ → → → This position should be avoided,
because otherwise liquid may also leak out
if motor is not used!
Position : motor 2 connected to cooling
Position : no cooling!

6.3 Overview: controls control panel

A
B
C
D
A) Display: Display of various operational parameters.
B) Keys „Program 1" to „Program 3":
Choose Program 1 to 3 (choose for both motors separate)
C) Key „Print":
Print out of operating data (functions only with connected printer!)
D) Key „Motor 1/2":
Change between the connected motors.
E) Option keys „Hand piece":
„-" and „+": select reduction / transmission or fixed setting.
F) Option keys „Speed":
„-": reduce rotational speed
G) Option keys „Torque":
„-": reduce torque
H) Option keys „Pump":
„-": reduce pump speed
No. 31842 14/06
All manuals and user guides at all-guides.com

6 Operation

„+": increase rotational speed
„+": increase torque
„+": increase pump speed
MD20
E
F
G
H
7