Jenn-Air JDRP436HM Mode D'emploi page 7

Oven Shutdown Thermal Cutoff (non-resettable)
The oven shutdown thermal cutoff (non-resettable) is located at the back of
the oven. It will shut down the elements if the temperature at the back of the
oven exceeds component limits.
Verify that the oven shutdown thermal cutoff (non-resettable) is OK.
To replace this thermal cutoff (non-resettable):
1. Refer to the following chart for the correct Part Number.
Part Number Opening Temp.
4449751 338ºF ± 11.7ºF
(170ºC ± 6.5ºC)
2. Unplug range or disconnect power.
3. Replace the oven thermal cutoff (non-resettable).
4. Replace all parts and panels before operating.
5. Plug in range or reconnect power.
Marking (with Black
Letters)
Red label
7