Endress+Hauser Micropilot NMR81 Manuel De Mise En Service page 209

Micropilot NMR81
Entrée
Réglage usine
Information
supplémentaire
Density value
Navigation
Description
Information
supplémentaire
Minimum level
Navigation
Description
Entrée
Réglage usine
Information
supplémentaire
Minimum pressure
Navigation
Description
Entrée
Réglage usine
Endress+Hauser
0 ... 3 000 kg/m³
800 kg/m³
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Application → Tank calculation → HTMS → Density value
Shows the calculated product density.
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Application → Tank calculation → HTMS → Minimum
level
Defines the minimum product level for a HTMS calculation. If Lp - V falls below the limit
defined in this parameter, the density retains its last value or the manual value is used
instead.
0 ... 20 000 mm
7 000 mm
Accès en lecture
Accès en écriture
 Setup → Advanced setup → Application → Tank calculation → HTMS → Minimum
pressure
Defines the minimum pressure for a HTMS calculation. If the pressure P1 falls below the
limit defined in this parameter, the density retains its last value or the manual value is
used instead.
0 ... 100 bar
0,1 bar
Maintenance
Maintenance
Operator
-
Operator
Maintenance
Menu de configuration


209