Installation (Vent Outside) - Candy CFT63/1X/1 Manuel D'instruction

INSTALLATION (VENT OUTSIDE)

If you have an outlet to the outside, your cooker hood can be connected as
below picture by means of an extraction duct (enamel, aluminum, flexible pipe
or inflammable material with an interior diameter of 120/150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hoods should be placed at a distance of 65-75cm from the
cooking surface for best effect. See Pic 1
3. To install onto the wall, drill 4 holes of Ø 8mm on a suitable place according
with the centre distance of hole in the back of the cooker hood.See Pic 2
4. Insert the nut into the holes.
5. Insert the screws into the nuts and tight.
6. Put up the cooker hood onto the fixed screws.
7. Then use the attached accessories enclosed to turn the screws into the two
holes of inside the hood, and then fix the screws to tighten the hood onto the
wall.
8. Put the one way valve onto the cooker hood.
5