Installation - Candy CCT 685/2 X Manuel De L'utilisateur

for the fixed appliance and how the
appliance is to be fixed to its support,
thanks to refer to the section
"INSTALLATION AND FIXING".
 Regarding the instructions for the bulb
changing, thanks to refer to the section
"bulb changing".
ILCOS D code for lamp is: DBS-2.5/65-H-120/33

3. INSTALLATION

INSTALLATION (VENT OUTSIDE)
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or
inflammable material with an interior diameter of 150mm)
Before installation, turn the unit off and unplug it from the outlet.
The cooker hood should be placed at a distance of 70~80cm above the cooking
plane for best effect.
1. Remove the metal grease filters.
6