Installation (Vent Outside) - Candy CVMAD90N Manuel D'instruction

INSTALLATION (VENT OUTSIDE)

If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable
material with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 65~75cm above the cooking
surface for best effect.
3. Using a drill bit with an 8 mm diameter, make 8 holes in the wall at the position that
you reserve for installing the chimney and cooker hood body. See Pic 2.
4. Insert walll plugs into the holes that you have drilled for the cooker hood body,
fasten 2 × support screw ST4*40 mm halfway in, leaving them 2 mm out of the wall.
See Pic 2.
5. Hang the cooker hood onto the support screws.
6. Insert self-tap screw ST4*30 mm into the safety holes and fully fasten it to ensure
the cooker hood is well fixed. See pic 3.
18