Auto-Talk-Lock Setup - Panasonic WX-CH455 Mode D'emploi

w Auto-Talk-Lock setup
p
For a headset and (or) a Belt Pack where Auto-Talk-Lock is set up, it has a function to
select "TALK" automatically when the vehicle detector has become active, and you can talk
with the customer at the order post. One unit of the headset and (or) the Belt Pack can be
set to Auto-Talk-Lock setup per lane.
Note
p p Complete ID Registration, to do this setting.
1
Rotate the microphone boom to turn off the power of this product.
2
Rotate the microphone boom while holding down the [S] and [P] buttons to turn
on the power of this product.
p ● When the power is turned on, the voice messages "Hello", "Headset xx" (xx: ID
number registered in the Center Module) and "Lane x" (x: Connected Lane number)
are heard from the earphone.
[S] button
Power indicator
WX-CH455_PGQX2221ZAC1.indb 29
All manuals and user guides at all-guides.com
[T] button
[P] button
Lane indicator
2017/08/21
29
16:11:10