Communications With Customers (Talk) - Panasonic WX-CH455 Mode D'emploi

Operating procedures
w Communications with customers (TALK)
p
Any store personnel wearing the headset and (or) the Belt Pack can communicate
bidirectionally with any customer who is at the order post.
p p You will hear a beep in this product when a vehicle arrives at the order post.
When the Talk-Lock mode is preset
1
Press the [T] button.
p ● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2
Press the [T] button again.
p ● Communication is interrupted and the conversation is ended.
When the Press-To-Talk (PTT) mode is preset
1
Hold down the [T] button.
p ● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2
Release the [T] button.
p ● Communication is interrupted and the conversation is ended.
Note
p p The Talk-Lock mode and the Press-To-Talk (PTT) mode can be configured in the
setting mode. For further details, refer to pages 34 and 35.
18
WX-CH455_PGQX2221ZAC1.indb 18
All manuals and user guides at all-guides.com
[T] button
2017/08/21 16:11:09