Auto-Talk-Lock Setup - Panasonic WX-CH457P Mode D'emploi

Setting the unit
w Auto-Talk-Lock setup
p
For a headset where Auto-Talk-Lock is set up, it has a function to select "TALK"
automatically when the vehicle detector has become active, and you can talk with the
customer at the order post. One unit of the headset can be set to Auto-Talk-Lock setup per
lane.
Note
p p Complete ID Registration, to do this setting.
1
Rotate the microphone boom to turn off the power of this product.
2
Rotate the microphone boom while holding down the [S] and [P] buttons to turn
on the power of this product.
p ● When the power is turned on, the voice messages "Hello", "Headset xx" (xx: ID
number registered in the Center Module) and "Lane x" (x: Connected Lane number)
are heard from the earphone.
30
WX-CH457P_PUQX1020ZAV1.indb 30
[S] button
Power indicator
[T] button
[P] button
Lane indicator
2021/07/02 14:31:24