Operating Procedures; Preparations - Panasonic WX-CH455 Mode D'emploi

Operating procedures

w Preparations
p
Prior to operating this product, confirm that the system setup for this product, Center
Module, order post, and other devices has been completed.
1
Insert the battery in this product and then rotate the microphone boom to turn
on the power.
p ● When the power is turned on, the voice messages "Hello", "Headset xx" (xx: ID
number registered in the Center Module) and "Lane x" (x: Connected Lane number)
are heard from the earphone.
2
Wear this product.
Place this product on your head with the ear pad side up against your ear.
The length can be adjusted on the head pad side.
Rotate the microphone boom to adjust it so that the microphone boom tip is positioned
near your mouth. If the microphone boom tip is touching your face or far away from
your mouth, set the microphone boom to the optimum position by adjusting the head
pad position forward/backward or rotating the ear pad to adjust the angle in relation to
the ear.
WX-CH455_PGQX2221ZAC1.indb 15
All manuals and user guides at all-guides.com
Head pad
Earphone
Microphone
boom
Ear pad
15
2017/08/21 16:11:08