Changing The Preset Programmes; Running Your Programme; User Overrides; Altering Display To Show Either Time Or Actual Room Temperature - Danfoss TP4000 Range Mode D'emploi

2.2 Changing the preset programmes

a) Press PROG until 1st pre-set time and
temperature appears in display.
b) Use + or – buttons to adjust the TIME (press
and hold to change in 10 min increments).
GB GB
c) Use Λ or V buttons to adjust the
TEMPERATURE.
FR
d) Press PROG to move to next preset time &
temperature (Event 2).
ES
e) Repeat steps b, c & d for programming
Events 3, 4, 5 & 6.
NL
Note: Press and hold PROG at any time will
make the unit return to RUN mode.
GR
PL

2.3 Running your programme

CZ
Press PROG – the colon in the LCD display
will start to fl ash. The heating will now be
controlled with the programmed times and
TR
temperatures.
HR

2.4 User Overrides

Sometimes you may need to change the way
RO
you use your heating temporarily, e.g. due to
unusually cold weather. The TP4000 has several
user overrides, which can be selected without
aff ecting the thermostat programming.
2.5 Altering display to show either
time or actual room temperature
· Press + and – together to change
between settings.
8 TP4000