Basics; Your Programmable Room Thermostat; Preset Programmes; Before You Start - Danfoss TP4000 Range Mode D'emploi

1.0 Basics

1.1 Your programmable room thermostat

The TP4000 allows you to programme up to 6 times and temperatures
GB GB
at which your heating will come on and go off each day.
It features several user overrides including frost protection,
FR
thermostat mode and time or temperature display.
ES

1.2 Preset Programmes

NL
Your TP4000 comes ready programmed with a set of operating times
and temperatures which often suit most people.
GR
PL
CZ
TR
If you want to change any of these settings you can do so by following
HR
the instructions on page 8.
RO
First, follow the steps on page 7 to set the correct time and date.

1.3 Before you start

Open the fl ap on the front of the programmer
and press the RESET button with a non-
metallic object until the display goes blank.
This will ensure that the factory programmes
are set and that the micro-computer in the
product is operating correctly.
6
Event Time
1 06:30
2 08:30
3 11:30
4 13:30
5 16:30
6 22:30
Temp °C
20
15
20
15
21
15
RESET
TP4000