Setting The Clock; Clock; Running Your Programme; Advanced - Danfoss TP4000 Range Mode D'emploi

1.4 Setting the Clock

Note: clock is displayed in 24 hour mode.

1.5 Clock

Press PROG and Λ until the time on the
display fl ashes.
Use + or - to adjust the TIME (press and hold
to change in 10 min increments).
Press PROG to enter the TIME.

1.6 Running your programme

If you are happy to use the preset
programmes on page 6, you don't need to
do anything else.
Your unit is now in RUN mode.

2.0 Advanced

2.1 Before you change the preset programmes

Please Note
The unit must be programmed in sequence. Event times cannot
be programmed out of sequence.
If you want to leave a preset time as it is, simply press PROG to
move on to the next setting.
During programming, if no buttons are pressed for 2 minutes the
unit will automatically return to RUN mode, and the programme set
up to that minute will be active.
Danfoss Heating Danfoss Heating
GB GB
FR
ES
NL
GR
PL
CZ
TR
HR
RO
7 7