To Temporarily Alter The Current Programmed Temperature; Frost Protection And Thermostat Mode - Danfoss TP4000 Range Mode D'emploi

2.6 To temporarily alter the current
programmed temperature
· Press Λ or V until required temperature is
displayed.
(This override will automatically cancel at
beginning of next programmed event).
2.7 Frost Protection and
thermostat Mode
A constant temperature between 5°C-30°C
can be selected if desired, for example, for frost
protection.
· Press Λ and V together.
· Use Λ or V buttons to set the desired low
temperature.
- At 5°C a snowfl ake symbol appears
indicating frost protection mode.
- At all other temperatures the snowfl ake
symbol is turned off .
· To return to automatic programming
press Λ and V together again.
2.8 Toggle between 12 hour and
24 hour clock
To change time display between 12 hour and 24 hour clock
Press Λ and + together to toggle between 12 and 24 hour clock.
Danfoss Heating
GB GB
FR
ES
NL
GR
PL
CZ
TR
HR
RO
9