Black Diamond RECON LT Guide De Démarrage Rapide page 8

All manuals and user guides at all-guides.com
FINE SEARCH (5C)
The direction arrow disappears at a distance reading of 2 m. Look for the point of the low-
est reading. Work slowly and on the surface of the snow.
PINPOINTING (5D)
Check the search result by systematic probing. On a hit, leave the probe stuck.
MULTIPLE BURIAL (5E)
A multiple burial is indicated clearly on the display by the number of small human figures
(2G, 2H).
Marking is possible from a distance reading of 5 m and is indicated by the MARK symbol
(2E). Press the MARK button (1D) briefly to "hide" the localized transmitter. A successful
flagging is confirmed by a frame around the human figure (2J). The display then indicates
the direction/distance to the next strongest signal inside the receiving range.
MORE HELPFUL BEACON FEATURES
• Automatic interference protection
• Old-device-indication
• iPROBE support
Find details in the full online manual.
DEVICE MANAGEMENT WITH THE PIEPS APP
Bluetooth and the PIEPS APP allow straightforward device management (e.g. software
®
update) and additionally provide a handy training mode.
Get the PIEPS APP (Android Play Store, iOS App Store), connect your BLACK DIAMOND
RECON LT and take advantage of all features!
To activate Bluetooth, press the button MARK (1D) while switching on the beacon.
A
DANGER! Risk of a non-transmitting device due to enabled Bluetooth!
The Bluetooth mode is intended for device management and training mode only. Never
use the Bluetooth mode in avalanche terrain!
BATTERY
Change the battery as soon as the battery capacity indication (2D) shows an empty bat-
tery. Move switch lock (1C) away from switch (1B) and rotate switch counterclockwise.
Align switch marking with white dot on rear cover. Lift the switch from the battery com-
partment (1H). Install battery, making sure orientation matches icon on rear cover. Align
the metal insert on the switch to the relief in the battery compartment and put into position
(this is the same alignment as switch removal.) Turn the beacon to "Send", making sure
that the switch lock secures the switch in place. (Refer to Figure 6)
Dispose of the device/batteries in accordance with applicable local laws and regulations.
A
DANGER ! Risk of explosion from incorrectly used batteries!
A
DANGER ! Risk of incorrect battery capacity indication
Only use batteries of type 1x Alkaline (AA) LR06 1.5 V or 1x Lithium (AA) FR06 1.5V!
The use of Lithium batteries must be confirmed in the PIEPS APP!
8