Black Diamond RECON LT Guide De Démarrage Rapide page 7

All manuals and user guides at all-guides.com
SEND  SEARCH
Slide the switch lock (1C) away from the switch (1B), rotate the switch (1B) clockwise to the
position SEARCH. Note that the switch does not lock in SEARCH position. .
SEARCH  SEND
Rotate the switch (1B) counterclockwise to the position SEND. Check that the switch lock
(1C) is fully engaged and that the switch is locked in place.
SECONDARY AVALANCHE | AUTO-SEARCH-TO-SEND
The BLACK DIAMOND RECON LT provides the feature Auto-Search-to-Send. By default,
it is disabled and can be enabled in the PIEPS APP device manager. Once enabled, the
device switches from search mode to send mode automatically after a certain time with-
out change in signal (burial).
GROUP CHECK
Despite a comprehensive self-check, a beacon check (transmit check and receive check)
is obligatory prior to every tour! The BLACK DIAMOND RECON LT provides a group check
function. In group check mode the receiving range is limited to 1 m.
GROUP CHECK REGULAR
Check: frequency
Start Press and hold the button MARK (1D) during the group check countdown
(CH)
Result "Distance indication" = OK
"ER" = error (frequency not according to standard)
End Release button
The Regular group check is sufficient for checking modern, digital devices with 3 antennas.
SEARCH MODE | SEARCH STRATEGY
SIGNAL SEARCH (5A)
Walk the search strip width in the search area quickly. The recommended search strip
width for the BLACK DIAMOND RECON LT is 50 m. The display shows "no signal" (5A1).
COARSE SEARCH (5B)
As soon as the signal is received, follow the direction indication quickly and see if the
distance reading goes down. If the distance reading increases, change your direction by
180°.
(5B1) go left
(5B2) go straight ahead
(5B3) go right
7