Rauch KUHN AGT Mode D'emploi page 24

URS AGT Joystick
3.7 Switch on the ignition of the
tractor.
3.8 Start the ISOBUS terminal.
The joystick is now ready for
operation.
For further information, please
refer to the operator's manuals of
the AGT mineral fertiliser
spreader and of the joystick.
NOTE
The joystick is equipped with a
"dead man's safety system".
This means that the green button
at the bottom of the joystick (a) has
to be pressed when operating the
fertiliser spreader.
The fertiliser spreader only
reacts to input from any other
joystick buttons if this button (a)
is pressed.
For further information, please
refer to the operator's manual of
the joystick.
The steps described in this
assembly manual only have to be
performed once. The settings
remain saved. Button 2 only
needs to be pressed when
starting the joystick the first time.
a
page 18 / 28