Rauch KUHN AGT Mode D'emploi page 22

URS AGT Joystick
3. Joystick configuration
As soon as the ISOBUS terminal is ready for operation, the joystick is displayed as ISOBUS device.
The joystick user interface is structured similarly as the user interface of the AGT extension mineral
fertiliser spreader.
For further information, please refer to the operator's manual of the ISOBUS terminal.
3.1 Open the menu and select the
joystick.
The user interface may vary
depending on the ISOBUS
terminal used. However, the
principle remains the same.
If the menu looks different from
the figure to the right, button 2
may not have been pressed when
plugging in the joystick.
In this case, repeat the
initialisation process of the
joystick.
3.2 Check the auxiliary input type.
At the ISOBUS terminal, it is set
to "AUX 2" by default.
3.3 Set the auxiliary input type to
"AUX 1".
page 16 / 28