Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
Once the countdown timer expires, the corresponding
zone will switch off. Then it will show the new min.
timer and the dot of corresponding zone will flash.
The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer
c) Cancel the timer
Touching the heating zone slider control that you want
to cancel the timer
Touch and hold the timer control " - ", the timer
decreases to "00" and the timer is cancelled.
3.3.10
Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if
ever you forget to turn off your cooking. The default working times for various power levels are shown
in the below table:
Power level
Default working timer (hour)
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before using this unit.
set more zones:
(set to 15 minutes)
(set to 45 minutes)
indicator.
1
2
3
8
8
8
10
11
12
4
4
4
17
(set to 30 minutes)
4
5
6
8
6
6
13
14
2
2
7
8
9
6
6
4
Publicité
Chapitres
Table des Matières
