Vibration Load - AL-KO BCA 4235 Traduction De La Notice D'utilisation Originale

GB
■
Only remove cuttings when
the motor and cutting device
are at a standstill.
■
Because of danger of cutting
injuries, do not touch the line
cutter with unprotected hands.
■
After pulling out a new line, al-
ways bring the appliance into
its normal working position
before switching it on.
■
Do not use a metallic cutting
line.
■
Always keep the guard plate,
spool head and motor clear of
mowing residues.
■
People who are not familiar
with the appliance should
practice handling it while the
motor is turned off.
■
When working on a slope:
■
Never work on a smooth
and slippery slope.
■
Always mow across the
slope, never down or up.
■
Always stand below the
cutting device.
■
After contact with a foreign
object:
■
Switch off the motor.
■
Check the machine for
damage.
■
Attach the blade so that it
does not loosen and fall
during operation.
24

3.7.2 Vibration load

WARNING!
Danger due to vibration
The actual magnitude of
the vibration emissions
during the use of the appli-
ance may deviate from
that stated by the manu-
facturer. Observe the fol-
lowing influencing factors
before or during use:
■
Is the appliance being
used as intended?
■
Is the material being cut
or processed in the
proper manner?
■
Is the appliance in a
proper condition of use?
■
Is the cutting tool prop-
erly sharpened or is the
correct cutting tool in-
stalled?
■
Are the handle grips
and any optional vibra-
tion grips mounted, and
are they firmly attached
to the appliance?
■
Only operate the tool at the
motor speed required for the
respective work. Avoid using
the maximum speed in order
to reduce noise and vibra-
tions.
Safety instructions
BCA 4235