Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• While in Stereo Group mode, currently connected Bluetooth devices are disconnected and
Bluetooth connection is disabled.
• If you select any source other than BT or power cycle the master Party Audio, the Stereo Group
mode is disconnected.
• This product does not support aptX audio stream with Wireless Group Play mode.
• If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode
may fail.
Disconnecting the Stereo Group mode
1. Press and hold the ADD STEREO button over 5 seconds (Master or Slave) after Stereo Group is
connected or press the ADD STEREO button (Master or Slave) before Stereo Group is connected.
• "OFF-ADD STEREO" appears on the display and the LED above the ADD STEREO button is off.
2. If you select any source other than BT on the slave units or the master Party Audio is turned off
and then back on, the Stereo Group mode is disconnected.
• If one of the Party Audio is disconnected from Stereo Group mode, another Party Audio is
automatically disconnected.
LED Indications
LED
STATE
Blink
Green
Solid
Red
Solid
Waiting for a Stereo Group connection.
The Stereo Group connection is successful.
There is an error with the Stereo Group connection.
ENG - 11
Description
Publicité
Table des Matières
