Led Indications - Samsung MX-T70 Mode D'emploi

• All slave units must be connected one by one. For example, after Host is connected, press GROUP
PLAY button on slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and
slave 3 one by one sequentially.
• While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth
connection is disabled.
• Bluetooth devices can search and connect with the host Party Audio only.
• When in Group Play mode, the slaves cannot connect to a Bluetooth device.
• If you power off and then power on the Party Audio or select any source other than BT on a slave
unit, in Group Play mode, the Group Play mode is disconnected.
• This product does not support aptX audio stream with Wireless Group Play mode.
Disconnecting the wireless Group Play mode
1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play is
connected or press the GROUP PLAY button (Host or Slaves) before Group Play is connected.
• "OFF-GROUP PLAY" appears on the display and the LED above the GROUP PLAY button is off.
2. If you select any source other than BT on the slave units or turn off the host Party Audio, the Group
Play mode is disconnected.
• If the disconnection is made from the host Party Audio, Group Play is disconnected.

LED Indications

LED STATE
Blink
Green
Solid
Red Solid
NOTE
• In wireless connection, Playback quality can be unstable depending on Bluetooth environment.
For better play, please keep the device in wired Group Play mode.
Waiting for a wireless Group Play connection.
The wireless Group Play connection was successful.
There is an error with the wireless Group Play connection.
Description
ENG - 9