Technical Problems, Warranty, Maintenance & Cleaning; Technical Problems; The Device Does Not Want To Start; No Function Seems To Be Working - GBA Fitvibe Smart Mode D'emploi

4 Technical problems, warranty, maintenance & cleaning
4.1

Technical problems

4.1.1 The device does not want to start.

Check whether there is any power, whether the power switch is on and whether
power cable and fuses are okay. If the fuses have blown, you may want to replace
them yourself, but make sure that you only use the type of fuse indicated on the type
plate. You can ask your supplier to order the right fuses for you.

4.1.2 No function seems to be working

Switch the device off and on again. Contact your supplier if the problem persists.
4.2

Warranty and service

• Only duly authorized service engineers are entitled to carry out repairs or
modifications and to add elements to the device.
• The electrical system of the user must comply with all laws and regulations.
• The device must only be operated by duly authorized persons in strict compliance
with the user manual.
• The device must only be used for its designated purpose.
• The device must be regularly maintained in compliance with the maintenance
instructions.
• All legal restrictions concerning the use of the device must be complied with.
Apart from the fuses, there are no components inside the "fitvibe smart" device which
may be exchanged and replaced by the user. In the event of incorrect use and non-
compliance with the maintenance instructions, the Uniphy Elektromedizin GmbH &
Co. KG and their duly appointed representatives will cease to be liable for all resulting
damages, personal injuries, defects or malfunctions. Customer service and warranty
will be provided through your supplier. The terms and conditions of your supplier will
apply. The warranty will be invalidated by any violation of the aforementioned
instructions. The device is expected to have a technical life of 10 years.
Fitvibe SMART is mentioned for a "non professional environment"
Guaranteed period: 2 years with a maximum of 1000 operating hours. The average
use of the fitvibe SMART should not exceed 1 hour (vibration time) per day. A more
intensive use is considered by the manufacturer to be consistent with a professional
environment for which the fitvibe Medical and Fitvibe Excel series have been
developed.
4.3

Maintenance

The manufacturer recommends subjecting the device to an annual inspection by an
engineer. The following components should be checked with particular attention:
all bolted and mechanically clamped connections
all cables and their connecting elements (visual control)
the functional safety of the manual switch and the foot switch
the rubber springs (visual check for mechanical damage)
4.4

How to clean the device

You can use a slightly moist cloth to clean the vibration plate, the control unit and the
accessory items. Use a mild and non-abrasive detergent!
The handle, if necessary, can be treated with a commercial disinfectant.
16
Fitvibe SMART