Contents; Assembly - Shindaiwa DH212 Mode D'emploi

c
ontents
After opening the carton, check for damage. Immediately notify your retailer or Shindaiwa Dealer of damaged or miss-
ing parts. Use the contents list to check for missing parts.
1 - Hedge Trimmer Assembly
1 - Operator's Manual
1 - Warranty Registration Card
1 - T-Wrench
1 - Blade Stiffener
4 - Blade Locknuts
4 - Stiffener Washers
1 - Blade Cover
a
ssembly
NOTe
For normal cutting, Shindaiwa strongly recommends the blade
stiffener be installed. In extreme conditions, such as commercial
cutting, or when cutting thick and/or dense branches, efficiency
may be increased by trimming without the blade stiffener.
Tools required: (2) 10 mm Sockets & Extensions
Parts Required: Blade Stiffener, Blade Lock Nuts, Washers
WARNING
Hedge Trimmer blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
IMPORTANT
Follow blade bolt adjustment instructions exactly. Failure to do so
could result in damage to blades or gearbox.
All manuals and user guides at all-guides.com
9