Supplying Power - JVC GR-DV1 Manuel

All manuals and user guides at all-guides.com
QUICK OPERATION GUIDE
CASSETTE COVER
CASSETTE HOLDER
OPEN/EJECT SWITCH
BATTERY COVER

SUPPLYING POWER

Install A Fully Charged Battery
1
Open the battery cover in the direction of the
arrow.
2
Remove the battery's protective cap and insert
the battery + – first.
3
Close the battery cover.
LOADING A CASSETTE
1
Turn on the power, then slide the OPEN/EJECT
switch in the direction of the arrow. The
cassette cover releases. Open the cover in the
direction of the arrow until it locks. The holder
opens automatically.
2
Insert a tape.
3
Close the holder and it recedes automatically.
4
Close the cassette cover.
STANDBY
POWER LAMP
OFF
5S
RECORDING
START/STOP BUTTON
RECORDING
1
Pull out the viewfinder and align the mark with
"STANDBY". The lens cover opens
automatically.
2
Set the Power Dial to "REC", then press
RECORDING START/STOP. A "beep" signals
the start of recording.
3
To pause during recording, press RECORDING
START/STOP. Two beeps indicate the
RECORD/STANDBY mode.
4
When you're finished, push the viewfinder in,
aligning its mark with "CAMERA OFF".
PLAYBACK
1
Pull out the viewfinder. The lens cover opens
automatically.
2
Set the Power Dial to "PLAY".
3
Slide open the camcorder's Operation Panel
cover.
4
Press REW to rewind the tape to the beginning.
5
Press PLAY and watch what you've recorded in
the viewfinder.
6
When you're finished, press STOP.
7
PAUSE
REC