Remote Controller-Rm-Rk41 (For Kd-Sc800) - JVC KD-SC800 Manuel D'instructions

Remote controller—RM-RK41
This section is for KD-SC800.
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held until
"SEE YOU" appears on the display.
• Drops the volume level in a moment if
pressed briefly.
Press again to resume the volume.
2 • Selects the band while listening to the radio.
Each time you press the button, the band
changes.
• Does not function as the PROG button.
• Does not function as the DISC + button.
3 • Selects the preset stations while listening to
the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
• Does not function as the DISC – button.
4 Functions the same as the control dial on the
main unit.
Note: These buttons do not used for adjusting
"CLOCK H," "CLOCK M," "LEVEL," and
"DIMMER" (see pages 9, 19, and 20).
5 Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.
6 Selects the source.
Each time you press the button, the source
changes.
7 • Searches for stations while listening to the
radio.
• Does not function as the 5 (up) or ∞ (down)
button while listening to the radio.
• Fast-forwards or reverses the track if
pressed and held while listening to a CD.
• Skips to the beginning of the next track or
goes back to the beginning of the current (or
previous) track if pressed briefly while
listening to a CD.
5