Using The Remote Controller (Rm-Rk252) - JVC KW-AVX726 Manuel D'instructions

Using the remote controller (RM-RK252)

Installing the batteries
Insert the batteries into the remote controller by
matching the polarity (+ and –) correctly.
Caution:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace the batteries.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
The following describes all the available operations
for all the sources.
• USB/ iPod/DAB/Radio Data System operations
are only applicable for KW-AVX726/
KW-AVX725.
• To easily locate the available operations between
different type of files,
R03/LR03/AAA
.
35, 36
1
button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5 ∞
/ buttons
• TUNER/DAB: Selects the preset stations/
services.
INTRODUCTIONS
Continued on the next page
9