4.3 FIRST USE
FR
Check the battery
ES
PT
IT
EL
PL
Pay particular attention using the machine for the first time : focus and dedicate all your attention to this
first use. Make the first trial on a free space with no obstacle and no surrounding element
RU
4.4 OPERATION
KZ
Start the product
To start the blower, press the switch button to 1 or 2. To stop, press the button to 0. There are two speed
buttons on top of the 20V blower. The bottom button moves the blower into HIGH SPEED (183km/h). The
UA
top button moves the blower into TURBO SPEED (200km/h).
Operate the product
RO
EN
• Operate the product only at reasonable hours – not early in the morning or late at night
when people might be disturbed.
• Do not operate the product in an explosive atmosphere.
• Avoid using the product in bad weather conditions, especially when there is a risk of
lightning. Do not operate the product in poor lighting. The operator requires a clear view
of the work area to identify potential hazards.
• Use of hearing protection reduces the ability to hear warnings (shouts or alarms).
The operator must pay extra attention to what is going on in the work area. Do not get
distracted, and always concentrate on the task.
• Operating similar tools nearby increases both the risk of hearing injury and the potential
for other persons to enter your work area.
• Keep firm footing and balance.
• Do not overreach. Overreaching can result in loss of balance. Always be sure of the
footing on slopes.
• Walk, never run. Keep all parts of your body away from any moving part.
WARNING ! Read the « SAFETY INSTRUCTION » section at the
beginning of this manual including all text under subheading
therein before using this product.
The battery is not fully charged at the time of purchase.
Before using the blower for the first time, place the battery in
the charger and charge it fully.
CAUTION ! Always wear safety glasses. Wear a filter mask if
the operation is dusty. Use of proper gloves and substantial
footwear is also recommended.
192