STERWINS UP20 Notice De Montage - Utilisation - Entretien page 192

4.1 UNBOXING
1
2
3
4
5
6
7
• Wear gloves when unboxing.
• Do not use cutter, knife, saw or any other similar tool for unboxing.
• Carry the tool only by the handles.
• Keep the box for further reuse (transport and storage).
• Keep instruction manual in a dry area for further consultation.
4.2 INSTALLATION
Assemble the different elements together according to the illustration so that they are correctly
assemblied (well aligned and fully inserted). Do not force on any element to assembly it. In case screw
are necessary : tight it with appropriate tool.
Attaching/Removing the tube
Align and attach the upper tube onto the air outlet with a twist motion until the release button snaps in
position. Align and attach the lower tube onto the upper tube To remove, press the release button and
pull the lower tube until the button is disengaged then release it.
Installing/Removing the battery pack
WARNING : Make sure the latch on the bottom of the battery pack snaps in place and the battery pack is
fully seated and secure in the blower's battery docking port before beginning operation.
Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in serious
personal injury.
To install : To attach, align and slide the battery pack onto the slots of the battery docking port until it
locks in place.
To remove : To release, press the battery unlock button and remove the battery pack from the product.
8
9
11
10
191
1. Handle
2. On/off switch
3. Battery pack(not included)
4. Air vents
5. Upper tube release button
6. Air outlet
7. Upper tube
8. Lower tube release button
9. Lower tube
10. Nozzle
11. Charger (not included)
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN