Vehicle Fitting Information - Nuna PIPA ISOFIX base Manuel D'instructions

Vehicle Fitting
Information
The infant car seat with base are classified for "Semi-universal"
use. They are suitable for fixing into the seat positions of the most
cars. The letters on the diagram to the below correspond with the
vehicle fitting positions listed in the following pages.
Seat positions in other cars may also be suitable to accept the
child restraint. If in doubt, consult either the child restraint
manufacturer or the retailer.
ALWAYS give priority to the rear seats of your vehicle.
DO NOT fit your child restraint onto a vehicle seat fitted with an
airbag, unless it can be deactivated.
If your child restraint can be fitted, it is marked with V.
2
If your child restraint cannot be fitted, it is marked with X.
1
If your vehicle is not listed in this manual or it is not marked with
either a V or X then please refer to your vehicle's handbook or
3
contact the manufacturer for further information.
1
2 3
33