Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Within the next 10 seconds, set the required cooking
3.
time using the number keys.
Touch the cook timer key to confirm the selected
4.
setting.
The cooking time begins to elapse.
Note: The same cooking time can be set automatically
for all cooking zones. The set time for each of the
cooking zones counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Using Cook timer with AutoChef
When you are cooking with AutoChef
cooking time will begin to count down once the
temperature for the selected frying level has been
reached.
Changing or deleting the time
Select the cooking zone and then touch the cook timer
key.
Change the cooking time using the number keys or set
to delete the programmed cooking time.
‹‹
Touch the cook timer key to confirm the selected setting.
When the time has elapsed
The cooking zone switches off, the
and the cooking zone switches to power level
acoustic signal sounds.
and the
indicator flash in the timer display.
‹‹
V
When the
symbol is touched, the indicators go out
y
and the acoustic signal ceases.
Notes
To set a cooking time of under 10 minutes, always
▯
touch 0 before you select the required value.
If a cooking time was set for several cooking zones,
▯
the time information for the selected cooking zone is
shown in the timer display.
Select the relevant cooking zone to call up the
▯
remaining cooking time.
You can set a cooking time of up to
▯
®
the programmed
®
y
display flashes
. An
‹‹
minutes.
ŠŠ
Kitchen Timer
The Kitchen Timer can be set for periods of up to
minutes. It is independent of the other settings. You
ŠŠ
can also use the kitchen timer when the cooktop is
turned off or locked.
This function does not automatically switch off a cooking
zone.
Setting procedure
Touch the kitchen timer key. The
1.
V
indicator light up in the timer display.
Select the required time on the control panel and
2.
touch the kitchen timer key to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the kitchen timer key.
Change the programmed time using the number keys or
set
to delete the programmed time.
‹‹
Touch the kitchen timer key to confirm the selected
setting.
When the time has elapsed
An audible signal sounds once the time has elapsed.
and the
symbol flash in the timer display.
V
The indicators go out after touching the kitchen timer
key.
Count Up Timer
The count up timer function displays the time that has
elapsed since activation.
This functions independently from the cooking zones and
from other settings. This function does not automatically
switch off a cooking zone.
Activating
Touch the count up timer key. The
indicator light up in the timer display.
V
The time begins to count up.
Deactivating
Touching the count up timer key turns off the stopwatch
function. The timer displays remain lit.
If you touch the count up timer key again, the displays
go out.
The function is deactivated.
symbol and the
‹‹
‹‹
symbol and the
‹‹
15
Publicité
Chapitres
Table des Matières
