Intended Use - Hilti SB 4-A22 Manuel

▶ Before cutting through pipes, make sure that the pipes are empty, i.e. that they do not
contain liquids. Drain the pipes if necessary.
▶ When cutting through pipes, hold the power tool above the level of the pipe you are
cutting through.
◁ The power tool incorporates no protective measures to prevent ingress of water or
moisture. Liquids running out of pipes may cause a short circuit in the power tool.
▶ Never cut into unknown materials and keep the line of cut above and below the
workpiece free of obstacles.
◁ If the saw blade strikes an object it may cause the power tool to kick back.
▶ Wear protective gloves also when changing the accessory tool.
accessory tool presents a risk of injury (cuts or burns).
▶ Always remove the battery when the power tool is not in use, before maintenance,
before changing accessory tools and before transport.
▶ Engage the transport lock before storing or transporting the power tool.
▶ Observe the manufacturer's instructions regarding the handling and storage of saw
blades.
2.4 Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-
ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not take apart, squash or incinerate batteries and do not subject them to
temperatures over 80 °C.
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch, it may be defective. In this case, place the power
tool in a non-flammable location, well away from flammable materials, where it can be
kept under observation and left to cool down. Contact Hilti Service after the battery
has cooled down.
3 Description
3.1 Product overview
Battery
@
Control switch safety lock (switch-
;
on interlock)
Control switch
=
Grip (insulated gripping surface)
%
Guide
&
Bandsaw blade
(
Direction-of-rotation arrow on cas-
)
ing
3.2 Product overview
Saw blade guard
£
Saw blade guard fastening screw
|

3.3 Intended use

The product described is a cordless bandsaw. It is designed for cutting wood, metals
and plastics.
Printed: 19.10.2016 | Doc-Nr: PUB / 5310781 / 000 / 00
All manuals and user guides at all-guides.com
1
2
Lever for tensioning bandsaw blade
+
Side handle (insulated gripping
§
surface)
Battery release button
/
Battery state of charge indicator
:
Roller for bandsaw blade
∙
Blade guide
$
Touching the
English 17